header-image

Cross Contamination Control - Online Training Recording

Seminar-Nr. 21985

Referent:innen

Robert G. Schwarz

Robert G. Schwarz

GXP-TrainCon

Dr Markus Keller

Dr Markus Keller

Fraunhofer Institute for Manufacturing Engineering and Automation (IPA)

Dr Harald Stahl

Dr Harald Stahl

GEA

Nikolaus Ferstl

Nikolaus Ferstl

Facility Engineering Services

Zielsetzung

This GMP training aims at unveiling possible risks of cross contamination during the production process of Pharmaceutical products and APIs. This is especially important for patients’ safety, product quality and to be in compliance with chapters 3 and 5 of the EU GMP regulation as well as the new EU GMP Annex 1. The prevention of cross contamination is part of the contamination control strategy and has to be documented accordingly taking into consideration QRM principles according ICH-Q9.
 
You will learn
  • how to detect possible risks
  • how to avoid cross contamination
  • how to prove the avoidance of cross contamination
  • how to document a regulatory compliant strategy

Hintergrund

Cross Contamination is one of the highest risks for patients using pharmaceutical products. Not only the presence of small amounts of antibiotics or other highly potent compounds in medicinal products can cause severe damage, but also carryover of one product into another pharmaceutical product is of high Risk to the patient. According to the Medicines & Healthcare Products Regulatory Agency in the United Kingdom for example, Product contamination is the second to third highest reason for recalls in the UK in recent years.
 
The EU commission already reacted on that in 2015 by updating the chapters 3 (premises & equipment) and 5 (production) with the focus on minimizing the risk of cross contamination. Already three years before a new EMA Guide on setting health-based exposure limits was published. This new guide has massive Impact on the dedication of facilities and also on the calculation of Limits for cleaning validation. Limits for the maximum carryover now have to be calculated by considering the toxicological/pharmacological properties of each single product, answering the question: how much cross contamination is allowed. The latest document addressing cross contamination is the new EU GMP Annex 1. It contains several paragraphs dealing with cross contamination and contamination in general which includes a risk-based Contamination Control Strategy (CCS) aligned with Quality Risk Management principles according to ICH-Q9.
 
Reasons for cross contamination can be manifold and caused by technical as well as organisational deficiencies. Insufficient cleaning of equipment, poor facility design or inappropriate design of the HVAC system may be reasons as well as contamination via personnel or primary packing material. But also, the design of the production process itself can be the cause for cross contamination, for example due to open product handling during transfer or sampling operations in shared plants without adequate measures.
 
It is therefore extremely important to mitigate the risk of cross contamination, starting already at the design phase of processes and equipment. In addition, it is essential to understand how contamination risks can be detected. Some measures include quality oversight walks in production Areas or reviewing the documents (SOPs, technical drawings, etc.) already during process development, design qualification and additionally on a regular basis which has to be predefined.
This mitigation of cross contamination risks should be included and regularly reviewed – and updated if required – as part of the contamination control strategy (CCS) which has to be documented accordingly.

Zielgruppe

This training is aimed at Production, QA and engineering Departments of pharmaceutical companies to maintain product Quality and patient safety in a regulatory compliant and agile production life cycle. Suppliers for the pharmaceutical industry are also addressed in order to better understand the requirements of their customers.

Technical Requirements

To participate in an on demand training course or webinar, you do not need any software. The recordings are made available via a streaming server. In general, the recording is provided in MP4 format, which any PC (Microsoft Windows, Apple IOS) or tablet can easily display.
 
Timing and Duration:
When you register for the on demand Training course or webinar you can decide at what date you want to follow the training course online. For a 1-day training course you will have 2 days in which the stream is available (for 2-day training course 3 days and for a 3-day training course 4 days). Within in this timeframe you can start & stop the stream according to your needs.
In time before the scheduled date (your desired date) you will receive an e-mail from us with a link for direct participation as well as your log-in data.
Please be aware: The recording does not include the Q & A sessions.
 
Training Course Documentation and Certificate:
The presentation will be made available as PDF-files via download during the online training course. After the successful completion of the online training, you are able to download the certificate of attendance.

Programm

Regulatory Requirements: Contamination Control Strategy & Cross Contamination
  • The view of EMA
  • The view of US-FDA
  • Shared facilities regulations
  • Contamination and sterile products
Sources of Contamination – Modes of Cross Contamination – Segregation
  • Do different sources mean different impact?
  • Where cross contamination could occur and different likelihoods
  • Is segregation a no brainer?
  • Cross contamination in Biotech
Containment Solutions – Avoiding Exposure – Minimizing Cross Contamination
  • Exposure and how to calculate
  • Equipment and containment concepts
    • Closed product handling
    • Sampling
    • Material Transfer
  • The PDE/ADE concept: how much contamination is allowed?
  • Avoiding of cross contamination
    • Air born contamination
    • Contamination of surfaces
  • Verification of the tightness of a containment system
Cross Contamination through poor Organisation
  • Organisational points to consider
  • The human factor
  • The importance of training and motivation
Cross Contamination through poor HVAC Design
  • Airborne particles
  • Pressure / hygienic zones – maintaining over pressure
  • The clean corridor Concept
  • Simulation and visualisation of air flow
  • Classification of ventilation Systems
  • Concepts for HVAC Systems
  • Components of AHUs (filters, Duct work, etc...)
  • Classification and change of filters
  • Control and monitoring strategies
Cross Contamination through poor Equipment Design
  • Cleanability of equipment as the key to avoiding crosscontamination
  • In-line cleanability? – Cleanability for parts that are disassembled?
  • Importance of drainability (cross-contamination by product and detergent residues)
  • Gap-free and dead-space-free design of system components
    • Components (connections, valves, pumps, sensors)
    • Mixing and preparation vessels, bioreactors
  • Cross-contamination due to lack of technical support
    • Deterioration of surface Quality
    • Wear of static and dynamic seals
Cleaning & Cleaning Validation
  • Poor Cleaning – main reason for cross contamination
  • Dealing with multipurpose strategies in cross contamination Control
  • Cross Contamination – main focus of cleaning validation
Documentation: CCS, HBEL assessment, QRM
  • Cross contamination control and CCS
  • HBEL – from the environmental risk to patient’s risk
  • Cross contamination control – it is all about QRM
Recording from 1/2 October 2024
Duration of the recording: approx. 6 h 40 min

ECA-Member*: € 1690,-
Regular Fee*: € 1890,-
EU/GMP Inspectorates*: € 945,-
APIC Member Discount*: € 1790,-

Alle Preise zzgl. MwSt. Wichtige Hinweise zur Umsatzsteuer.

* auch unkompliziert per Kreditkarte bezahlbar
American Express Visa Mastercard

icon
Weitere Termine vor Ort
Weitere Termine vor Ort nicht verfügbar
icon
Weitere Termine online
Weitere Termine online nicht verfügbar

Haben Sie noch Fragen?

Wir stehen Ihnen für weitere Auskünfte gerne zur Verfügung.

Frau mit Headset
Tel.: +49 6221 84 44 0
E-Mail: info@concept-heidelberg.de

Zurück

Teilnehmerstimmen - das sagen andere über unsere Seminare:

"Die Umsetzung mit Memberspot ist wirklich ausgezeichnet gelungen.
Es unterstützt die Wissensvermittlung und gewährleistet auch die richtige Durchführung des Kurses.”
Christian Wagener, WAGENER & CO. GmbH
GMP Basis-Einstiegsschulung (B 1) - Aufzeichnung Online Seminar, April 2024

„Danke für das tolle und interessante Seminar! Ich nehme mir fachlich total viel mit und habe viele tolle Menschen kennengelernt.“
Melanie Schifferer, DAIICHI SANKYO EUROPE GmbH
Batch Record Review (QS 23)
September 2024

Guter, breit gefächerter Überblick mit interessanten Verknüpfungen zur Praxis,
welche die Theorie super veranschaulicht.”
Marina Kicoranovic, Labor Hartmann GmbH
GMP/Basis-Einstiegsschulung (B 14), September 2023

Die Referenten waren sehr gut! Sie haben sehr klar gesprochen, nur sehr wenige englische Begriffe
verwendet (super) und waren sehr praxisbezogen.”
Astrid Gießler, Regierungspräsidium Karlsruhe
Live Online Seminar - Basiskurs Computervalidierung & Datenintegrität im GxP Umfeld (B 3), Juni 2023

Sehr guter Bezug zur Schulung für einen GMP-Anfänger. Habe mich sehr gut abgeholt gefühlt.”
Dr. Harald Werner, Infraserv GmbH & Co. Höchst KG
GMP-Basisschulung (B 1), Juni 2023

„Interessante Themen, gut vorgetragen, die eigenen Erfahrungen der Vortragenden helfen, dies noch besser nachzuvollziehen.“ „Gute Gestaltung der Workshops, das Zusammenarbeiten in Gruppen und der Austausch mit anderen hilft sehr.“
Manuela Seibert, Merck, GMP-Leadauditor/in (FA 2), April 2024

NEWSLETTER

Bleiben Sie informiert mit dem GMP Newsletter von Concept Heidelberg!

GMP Newsletter

Concept Heidelberg bietet verschieden GMP Newsletter die Sie auf Ihren Bedarf hin zusammenstellen können.

Hier können Sie sich kostenfrei registrieren.

Kontakt

Kontaktieren Sie uns

Haben Sie Fragen?

Concept Heidelberg GmbH
Rischerstraße 8
69123 Heidelberg

Tel. :+49622184440
Fax : +49 6221 84 44 84
E-Mail: info@concept-heidelberg.de

zum Kontaktformular